Spa dimensions (cm): 210 x 210 x 93
Seats: 4 + 1 lounger
Dry weight: 310 kg
Water volume: 1210 l

Water jets: 64
Air jets: 10
Massage pumps: 2 x 3CV | 2.2kW
Air pump: 400W
Circulation pump: 0.35CV | 0,26kW

• Gecko® system with in.k330 control panel
• Titanium heater 3kW
• Inox structure 316
• Ozonator
• SubLite underwater light
• ChromoLite chromotherapy
• Lit waterfall
• Jets fountain
• 4 headrests

Included in this spa. Choice of colours.

Fusion Stereo I | with bluetooth system, speakers in surround panels, subwoofer.
Aroma Sensations | Aromatherapy
Pack WiFi with app with Gecko® in.touch.
UV system for extra disinfection.
Nordic Insulation | extra insulation noise reduction.  

• A level base for placement. In the event that there is an unevenness, no matter how slight, insulating polystyrene sheets will be required to level it.
• Perimeter space of approximately 50cm to be able to access the spa in the future for maintenance and repairs.
• Electrical connection: The hydromassage spa must be connected to a circuit protected by a differential switch dedicated only to the spa, without other electrical equipment being powered by this circuit. For the electrical connection (single phase) of the hot tub a 3-way cable is required - the length is determined by the position of the spa with a minimum of 4 metres. All cables that supply the spa must have the same characteristics, and wiring between 4-6mm thick is recommended depending on the spa's equipment. The wiring must be connected to the electrical box to an independent automatic thermal-magnet differential switch dedicated solely to the spa, with amperage depending on the thickness of the wire installed (consult your electrician).
• Water connection: the spa is filled with a garden hose and to empty it, there is a drain point in one of the corners of the spa to which a hose can also be adapted. To facilitate filling the spa, a water point near the spa is recommended. The spa does not come with automatic emptying/filling. It does not automatically fill or empty or require a drain under the spa.
• A building permit is not required for its placement. But a permit may be required to place the crane in public road space.